 |
|
We manufacture and supply high performing roll separators which are mainly used for removing fine iron contamination from the products such as silica sand, quartz, magnesite, feldspar, dolomite, food products, chemicals, ceramics, etc. These magnetic separators consist of hopper, electromagnetic feeder with dimmer control, roll construction, drive motor, adjustable splitter plates, and control panel.
We offer rare earth roll separator with a powerful rare earth magnetic roll, which also functions as a head pulley. As the product on the belt passes over the rare-earth magnetic roll, ferrous particles stick to the belt while the non-ferrous particles fall freely off the belt into the non-magnetic chute due to centrifugal force. Adjustable splitters are provided to ensure an optimum magnetic /non-magnetic split. Roll speed is variable and can be adjusted from 40 RPM to 400 RPM thereby enabling the aid of centrifugal force in separation of the magnetic and non-magnetic. Our roll separator consists of the following parts:
Feed Hopper:
Non-magnetic stainless steel construction, finely controlled adjustable feed gate with positive shut off designed for uniform feed with minimum bounce.
Roll Construction:
The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B are manufactured to very low dimensional tolerances.
Drive Motor:
This can be constant or have variable speed according to the capacity and the range of separation.
Adjustable Splitter Plate:
In stainless steel normally consist of a single splitter, however in certain cases splitter plates can be fitted with provision for middling product for different modes of treatment.
Chutes:
All chutes are stainless steel and are designed to withstand abrasion and to eliminate blockages.
|
|
|
|
|